Find the perfect professional for you

Get free quotes within minutes

17 Handyman Hacks: Time-Saving Tips And Tricks

07 Feb, 2024 / Handyman / Written by ServiceTasker Team / 198 Views / Last Updated 04 Apr, 2024

17 Handyman Hacks: Time-Saving Tips And Tricks

It is a famous saying “You have the same number of hours a day as Beyonce”. But there are only 24 hours a day and using this time wisely is required. Here, we are going to discuss 17 handyman hacks for your time-saving.


A handyman or a maintenance handyman, is a person skilled at a wide range of repairs and maintenance works, required in shops, buildings, and houses. You can also call them fixer, repair worker, handyworker, repair technician, and maintenance worker. Handymen's primary duties are repairing plumbing systems, testing various company or home appliances, and fixing tools or equipment.


However, it is not necessary to call a handyman in all situations. Therefore, here are 17 handyman hacks that can save you time and you can manage these easily.


Time-Saving 17 Handyman Hacks



  • Up And Away Storage
    They are of many types like ceiling drawers or small woodshop lumber storage ideas. It is best for the storage of small quantities. These are of long, narrow offcuts and mouldings exactly above your head. The angle present on the supports keeps the board from sliding. They can be away from the reach of children.

  • Paint Brush Storage
    Do not leave the paintbrush as it is after painting. You have to wrap it in a plastic wrap or an aluminium foil and pop it into the freezer. Remove it an hour before painting again and soak it in a solution of vinegar and water; it is now ready for use.

  • Soaker Bucket
    It is a beautiful hack for giving water to plants without any disturbances. In general, water runs off the surface rather than soaking it. If you want to give water to plants slowly then drill four holes in your bucket and hang it above the thirsty plant after filling water in it.

  • Straighten A Bowed Deck Board
    Wooden decks are a great investment for any home. But your timber supplier needs to give you the correct one and you receive a warped or curved deck board or it happens immediately after installation. To deal with this, use clamping to flatten it

  • Elevate Your Furniture While Painting
    It is one of the best handyman hacks you can try. While painting your furniture, especially your chairs, you sometimes find it very difficult to paint it from the base. So, for this, you can attach 10mm driving screws at the base of the chair legs. In this way, you can easily paint your chair, even the base.

  • Swing Down Storage
    It is a wonderful hack that consists of compartments or shelves that can be swung down or lowered for easy access to items. Commonly useful for overhead storage in garages and kitchen cabinets.

  • Use Of Caliper
    Do you have trouble measuring the outside diameter of a round object? Don’t worry, you can use callipers for measuring it as a very very good handyman hack. You can either set the jaws to the width of the object and measure the space between them. Or you can slide both heads onto one rule if you have a couple of combination squares. Then read the ruler by positioning the head above the object.

  • Muffle Carpet Floor Squeak
    It is done to stop the rubbing by holding it tight against the floor joist to reattach the sheet flooring. For this, you should identify the squeaky area, lift the carpet, inspect the subfloor, secure loose floorboards, apply lubricant, and then reattach the carpet. At the last test the area.

  • Tighten A Loose Hinge
    A very important task to test inside your furniture is to tighten a loose hinge immediately. For this, you should first unscrew the loose hinge. Locate the screw that is causing the hinge to be loose. Tighten them with the help of a screwdriver. Test it afterwards and apply the lubricant to ensure smooth movement.

  • Remove Adhesive From The Workbench
    To remove adhesive from the workbench, it is suggested to lay a sheet of thin painter’s plastic underneath, before setting it up for gluing. Do not use rock-hard adhesive on your bench to glue your piece, then wait for 2 hours and remove the excess.

  • Screwdriver Magnet
    Rub your screwdriver along a strong magnet to magnetize it, so that it will help you in holding and picking up screws easily. This magnetization is temporary and may fade over time so if the screwdriver loses its magnetism, you may need to repeat the process.

  • Nail Holder
    Use a pair of pliers or clothespins to hold a nail to avoid hammering your fingers. The two prongs of the clothespin will hold the nail in place, making it easier to hammer without accidentally hitting your fingers.

  • Paint Tray Liner
    Instead of cleaning your paint tray after each use, line it with aluminium foil or a plastic bag and dispose of it after every use. When you are done painting, just crumple up the foil and toss it for easy cleanup. It is the simplest way to reduce mess and save time.

  • Easy Caulking
    For easy caulking, apply painter’s tape on both sides of the area when you want to caulk. Remove the tape for a clean finish after the application of the caulk. Simply apply the tape, apply the caulk, and then remove the tape while the caulk is still wet for a neat seal. This gives a professional look.

  • Paint Roller Hack
    Put a paint roller in a plastic bag after use and then store it in a refrigerator to prevent it from drying. While using a paint roller you can use a W or M zigzag pattern when rolling paint for even distribution.

  • Drill Dust Catcher
    Attach a folded sticky note in the area where you drill to catch all the dust and debris. Attach it just below the drilling area, so that it hangs down like a little flap. This catches some of the dust as it falls, keeping your workplace cleaner.

  • Plunger Seal
    Use a plunger over the sink or toilet drain to create a temporary airtight seal. For this lubricate a plunger rim with a small amount of petroleum jelly or cooking oil which helps in better sealing and improving the plunging action.


Conclusion


Your life goes on very fast and time also, so it is your responsibility to make your life more valuable and productive. You can do it by spending more time on the ones you value and less time on unnecessary things. Implementing these Handyman hacks which are useful tricks and tips, helps you in saving time, and work more efficiently. To obtain the best results in your home improvement endeavours, remember to prioritize safety and if required do not forget to call your local handyman.

Get free quotes Register Business

YOU MIGHT ALSO BE INTERESTED IN

Handyman Hacks Time-Saving Tips and Tricks
Admin
Thu, 4, Jan 247

Handyman Hacks Time-Saving Tips and Tricks

Handyman
17 Handyman Hacks: Time-Saving Tips And Tricks
Admin
Wed, 7, Feb 198

17 Handyman Hacks: Time-Saving Tips And Tricks

Handyman
Categories Get free quotes Login Register Business