Do gas fitters need a licence in Australia?

Yes. All gas work in every state and territory must be done by a licensed gasfitter. In QLD the licence comes from Resources Safety and Health Queensland, and in WA you need a gasfitting permit from Building and Energy.

Licence by state

StateLicence needed?Licence and who issues itCheck a licence
NSWNew South Wales Yes Contractor licence or qualified supervisor certificate (gasfitting, incl LP gas)
Building Commission NSW (apply through Service NSW)
Gasfitting (including LP gas) needs a licence whatever the cost. An owner-builder permit does not cover it.
Check a builder or tradesperson licence (Service NSW)
VICVictoria Yes Plumbing registration or licence in the gasfitting class
Building and Plumbing Commission (BPC)
Gasfitting is a plumbing class in Victoria. Type B gasfitting is a separate class.
Find and check a practitioner (BPC)
QLDQueensland Yes Gas work licence or gas work authorisation
Resources Safety and Health Queensland (RSHQ)
You need a licence for any gas work, home or business. A business also needs a QBCC gasfitting contractor licence.
Search current gas work licence or authority holders (RSHQ Portal)
WAWestern Australia Yes Gasfitting permit (Class G general; I, E, P for special work)
Building and Energy (Director of Energy Safety)
Class G covers most home and business gas work, natural gas and LPG.
WA Online Licence Search
SASouth Australia Yes Gas fitting contractor licence + gas fitter worker registration
Consumer and Business Services (CBS)
The business needs a contractor licence. The person doing the work needs a worker registration.
CBS licensing register (Find a licence holder)
TASTasmania Yes Gas-fitting practitioner licence + gas-fitting contractor licence
Consumer Affairs Tasmania (formerly CBOS)
A licence expired for more than 60 days cannot be renewed. You must apply again.
Find a licensed tradesperson
ACTAustralian Capital Territory Yes Gasfitter construction occupation licence
Access Canberra (ACT Government)
Gasfitters are licensed under the Construction Occupations (Licensing) Act 2004. Gas appliance workers have their own licence.
Access Canberra public registers
NTNorthern Territory Yes Gasfitter licence (general, Type B, provisional or auto)
NT WorkSafe
General and Type B licences last 5 years. Provisional licences last 12 months.
Ask the regulator

Jobs that need an extra licence

Gas work for customers as a businessContractor licence (e.g. QBCC gasfitting in QLD, contractor licence in NSW, SA and TAS)
NSW, QLD, SA, TAS
Large commercial or industrial (Type B) appliancesType B gasfitting class, licence or permit
VIC, QLD, WA (Class I), NT
Caravans and boatsCaravan / boat endorsement
TAS
LPG autogas in vehiclesAuto gas licence or permit
WA (Class P / E), TAS, NT
Water and sanitary plumbingPlumbing licence
every state

Hiring? How to check a licence

  1. Ask for the licence number and the exact name on the licence.
  2. Search that number on the official register for your state (links below).
  3. Check the licence is current, not expired, suspended or cancelled.
  4. Check the licence class covers your job.
  5. Make sure the name on the quote or invoice matches the licence holder or business.
  6. Make sure the licence or permit covers gas, not just water plumbing.
  7. For LPG in a caravan, boat or car, check the special endorsement or class.
  8. Ask for the compliance certificate or safety certificate when the job is done.

Find local businesses: Gas FittersHeating System InstallerGas Heater

On ServiceTasker, a business uploads its licence and our team checks it before a licence badge shows on its profile. You see what it holds, never the number or the document.

For businesses: how to get this licence

  1. Qualify: finish a Certificate III in Gas Fitting or Plumbing with the required gas units (TAS also accepts Certificate III in Mechanical Services plus Certificate IV units).
  2. Experience: most states want supervised experience. NT asks for 2 years for a general gasfitter licence. WA asks for at least 250 hours of on-the-job training for a Class G permit.
  3. Documents: ID, a photo, your qualification and results. Some states ask for a police check or a declaration about convictions (WA since 1 July 2025).
  4. Apply to your state regulator (links below). QLD: RSHQ Portal. WA: Building and Energy gasfitting permit.
  5. If you will run a business, check if your state also needs a contractor licence.
  6. Licensed in another state? Automatic mutual recognition (AMR) may let you work under your home-state licence. Notify the regulator before you start. Not every licence class is covered, so check the state page first.
StateWho issues itApply here (official)Requirements
NSWBuilding Commission NSW (apply through Service NSW)How to applyRequirements
VICBuilding and Plumbing Commission (BPC)How to applyRequirements
QLDResources Safety and Health Queensland (RSHQ)How to applyRequirements
WABuilding and Energy (Director of Energy Safety)How to applyRequirements
SAConsumer and Business Services (CBS)How to applyRequirements
TASConsumer Affairs Tasmania (formerly CBOS)How to applyRequirements
ACTAccess Canberra (ACT Government)How to applyRequirements
NTNT WorkSafeHow to applyRequirements
Already licensed? Add your licence on ServiceTasker

Last checked: 12 November 2026. General information only, not legal advice. Rules, fees and forms change: always check with the regulator in your state before you hire or apply. Some details could not be confirmed online and are left out; the regulator can confirm them.

Official sources (22)

Other licence guides: PlumbersElectriciansAir conditioningSecurity, CCTV and locksmithsPest control (incl. possums, snakes, bees)Termite inspection and treatmentAsbestos removal and demolitionBuilders and extensionsBathroom and kitchen renovationPaintersTilersRoofers and guttersPools and spasHandyman: what needs a licence

Categories Login Register Business
Get Free Quotes
Post a job with AI"Fix a leaking hot water…" Start