Roller blinds are one of the most desired blinds for homeowners due to their stylish design, practicality and ease of use. Roller blinds may be in a living room, the kitchen area or even in a bathroom and come in several designs to enhance the interior whilst permitting privateness and managed lights. However, as with any household accent, they need to be cleaned periodically to maintain their appearance and durability.
It is equally essential to clean and maintain your blinds for numerous reasons. First, it helps in their appearance preservation. Blinds get dirt, and different stains on them and after a while, they become dirty and are not very welcoming. If you maintain your blinds well the lifespan of the blinds will move up. Let us check out how to clean your roller blinds so that you can have the amazing benefits of it in your home.
Things You Need For Roller Bindls Cleaning
Before you start cleaning, gather the following supplies:
- Vacuum cleaner with a brush attachment
- Microfiber cloth
- Mild laundry detergent or dish soap
- Warm water
- Dishcloth or sponge
- Old toothbrush
- Stain remover (optional)
- Silicone spray
Having these tools on hand will make the cleaning process easier and will assist in getting the best outcomes.
Cleaning Method #1: Vacuuming and Wiping
You take time to clean your roller blinds if you want to keep them in a proper situation. This is mainly beneficial when you want to perform a quick clean by vacuuming and wiping over to stop dirt and mild dust.
- Identify the Material: First of all, test the cloth of your roller blinds to realise, what can be used for cleaning them. Most roller blinds have a vinyl-lined surface, which makes them non-absorbent and quite clean to easy. If your blinds are vinyl-coated you may clean them with the help of a humid material only. In case, they are made from material, you can use a vacuum cleaner to brush the surface.
- Fully Extend the Blinds: Pull the blind down fully to access all areas within the surface area of the blind to be cleaned. This will also help you know whether some might not be easily noticed but require one to make sure they clean them.
- Vacuum or Wipe: If you want to use a vacuum cleaner, ensure you connect the brush head then move the vacuum cleaner over the blinds and their backs. For vinyl blinds, you must use a moist microfiber cloth to clean the surface on the front and the bottom. This ought to be performed cautiously without being too harsh on the material.
- Dry the Blinds: If you properly your blinds using a damp cloth, ensure that before rolling them lower back up, the blinds are completely dry. This ought to be performed cautiously without being too harsh on the material in order no longer to damage it.
Cleaning Method #2: Deep Cleaning
After a while, roller blinds can also get dirty – with stains that you can’t cast off using easy wiping, cleansing, or vacuuming. Deep cleaning is required.
- Remove the Blinds: If you want to clean your blinds, and it is recommended that you do so at least once a year, you have to take them off their brackets. Many rollers are fixed with metal brackets that prevent them from being moved up or down. On one side of the bracket, there should be a small cover that opens by clipping; once opened, you pull out the blind. In case you are in doubt about how to take off your blinds, then you can ask the manufacturer or the supplier for aid.
- Prepare the Blinds for Cleaning: Twist it once and loosen the fabric only to the level of the blinds so that they are free. This will enable the cleaning solution to get to every part of the fabric during the soaking process.
- Soak in Soapy Water: Measure a small quantity of slight laundry detergent and place it dissolved in a heated water bathtub. Soak the blinds in the soapy water to make sure they are clean and leave them in the water for about an hour. This step assists in softening the fabric so that any dirt or stain can be easily relinquished by the cloth.
- Spot Clean Stubborn Stains: Once washed, take your time to go through the blinds to ensure that the stains are completely removed. Start washing these areas using a non-abrasive cloth or sponge then vigorously wash the areas. To remove even the most stubborn spots, one has to use an old toothbrush as this will not harm the fabric as it helps in the cleaning process. Remember that it is advisable to wash softly and always in the direction with the weave to prevent the development of marks.
- Rinse Thoroughly: Following spot cleaning, empty the basin and flush the blinds with fresh water. For this step, you can use a shower head to be very certain that all the detergent has been washed off. Finally, to avoid the soap from drying on the fabric thus causing a bad odour, or even leading to a change of colour of the fabric, it is advisable to rinse thoroughly.
- Dry the Blinds: Pull out the blinds to the maximum and cover it on a clothes hanger. If the weather is good then you can keep the drying rack outside to make the clothes dry faster. Before fitting the blinds back in the region ensure they are very well dried to save you mould or mould from forming.
Deep cleansing takes more time than ordinary cleaning, however, it's far tremendously recommended to hold the advent of the blinds.
Regular Cleaning Tips For Roller Blinds
To preserve the cleanliness of your roller blinds and clean their lifespan, it’s critical to incorporate some ordinary cleaning practices into your routine:
- Vacuum Regularly: Dust your blinds often using a vacuum cleaner with an upholstery brush attachment. This will aid save you dirt and dust from constructing up at the surface of the blinds. Roll the blinds down to their complete length, and vacuum from pinnacle to bottom to make sure even cleaning.
- Use a Damp Cloth for Deeper Cleaning: After vacuuming, smooth spills and stains with a moist fabric containing heat water and drops of liquid cleaning soap every 2 weeks. Make sure the soap you operate is mild at the cloth of your blinds and do not use whatever like chemical substances or bleach.
- Prevent Mould: Mould is one of the everyday issues, which can also arise within rooms with excessive humidity, with the kitchen and the toilet. The simplest method to keep away from. Proper airing of the room also facilitates one to keep away from excessive humidity ranges in the room and for this reason no mould formation.
How To Handle Roller Blind Stains and Mould?
It isn't always easy to treat stains and mould but with the right solution, blinds may be cleaned and made to appear as desirable as new.
- Spot Treat Stains: For stubborn stains, you ought to use the fabric-secure stain remover. Rub the stain remover on the stained part of the cloth with a circular motion, the use of a soft toothbrush in the same direction as the material’s weave. Remember to test the stain remover on a hidden place when you consider that it could harm the material similarly.
- Address Mold Promptly: Blind damage and deterioration can occur if the blinds are left wet for a long time, and this can lead to mould formation. And if your blinds are infested with mould, you should remove them and wash them if need be with the help of a professional cleaner. For small mould spots, one has to use a mild soap and an old toothbrush to clean the area. Another option is to use commercial mould removers which are also helpful but make sure you use the right one suitable for the blind fabric.
How To Maintain Roller Blind Mechanism?
Other parts of the roller blinds, for instance, the sidewinding mechanism, should also be maintained so that they can slide appropriately.
- Lubricate with Silicone Spray: Over time, the strings or threads that make your blinds to be operated can be rigid or maybe it is hard to pull them. Coat these parts with a silicone spray so that they remain free of moisture. But avoid getting any of the spray on the fabric as this may lead to staining.
- Clean Chains and Cords: As for the blinds that have plastic chains or cords, you should wash them with warm water and soap. The metallic parts, like steel or brass, should also be wiped gently with a dry cloth to avoid instance of formation of rust or corrosion.
Conclusion
Cleaning roller blinds may sound like a tricky task but when done by some certain standard procedures, it can be easy. When buying cleaning products always ensure you consult the manufacturer’s instructions and ensure blinds are well dried to avoid mould formation.