How Much Does Concrete Cutting Cost?

How Much Does Concrete Cutting Cost Per Metre?

Wondering how much does concrete cutting cost per metre in Australia? The price can vary significantly depending on depth, accessibility, and service type. On average, expect to pay around $100 to $2,000 per job, or between $1 and $12 per square foot. Specifically, for cuts based on depth, a 100 mm deep cut may cost approximately $20 per metre, while a 300 mm cut can range between $30 to $50 per metre. If you're charged hourly, concrete cutting services may cost from $100 to $150+ per hour.

For slab cutting tasks, the price typically starts at $15 to $20 per metre for a 100 mm concrete slab. Keep in mind that factors such as the type of material, job difficulty, equipment needed, and waste removal can all affect the final cost. Whether it's commercial or residential work, understanding the concrete cutting price factors helps you plan better and avoid hidden costs.

When Does The Need For Concrete Cutting Arise?

• Doors and Windows Installation: When windows and doors are installed, concrete cutting is required to
  create openings for these structures. Different types of concrete methods are used to cut doors and windows for
  openings in surfaces, like vertical and horizontal.


• Remodelling and Renovating: For projects relating to remodelling and renovation, concrete cutting is done
  to remove existing structures in order to modify them. Concrete cutting for remodelling and renovating includes
  cutting through concrete elements, slabs, and walls.


• Concrete Repairs: Depending on the type of concrete repairs you require, you can opt for repairs like
  surface, partial depth, full depth, joint crack corrosion mitigation, and structural repair. There is also
  an underwater repair type that typically deals with repairing concrete structures submerged in water, like marine
  structures and bridges.


• Expansion Joints: Concrete cutting also crucially helps with expansion joints, especially in slabs made
  from large concrete. Concrete expansion joints allow for contraction and expansion when temperature changes, which, in turn, minimises the risk of cracks.


• Core Drilling: To install plumbing systems and electrical systems, create openings for better ventilation, and for sample testing purposes, concrete cutting is done. The methods used for applications like these are core
  drilling and concrete cutting.

How Much Does Concrete Cutting Cost?

Usually, there are several factors that directly or indirectly affect and increase the cost of concrete cutting. So,
if you want to know what are those cost-affecting factors are, then take a look below:

• Concrete Cutting Type- In the market, there is a wide range of concrete cutting types such as core
  drilling, different types of soil sawing, slab lifting, hydraulic splitting, and more.


• Location- The location of the project also affects the concrete cutting cost, as the equipment and
  material availability, labour costs, and local regulations are different in urban and rural locations.


• Access and Site Condition- If there are sites that are difficult to reach or challenging to gain access
  to the region, then this influences the concrete cutting cost.


• Depth And Thickness- The more depth and thickness a concrete cutting involves, the more time it takes for
  labour, tool usage, and specialised equipment.


• Cut Quantities- If the work is a large-scale project, then it takes multiple cuts, and this, in turn,
  increases the cost of cutting. So, the more cuts, the more the cutting cost.


• Labour Cost- Typical labour costs include the number of workers, skilled labourers, overtime cost,
  expertise, certifications, training, specialised skills, experience, benefits, and insurance.


• Use Of Technology And Equipment- The choice of technology and equipment varies depending upon the type of
  concrete cutting you choose, like wall saws for wall sawing, hydraulic splitters for hydraulic splitting, etc.
  


• Project Complexity- The more a concrete cutting project is, the more obstacles and challenges arise, such
  as working in tight spaces.

Therefore, consider all these cost-affecting factors before deciding on your concrete cutting project to
choose the right professional.

How To Cut The Concrete On My Own?

Yes, you can do concrete cutting when you have the necessary tools and equipment, such as concrete saws, diamond
blades, and safety gear. In addition to this, you also need to get materials like concrete patches or fillers and a
source for a continuous water supply, such as a water hose. If you think that the tools and equipment are not in your
budget, then you can choose to rent them. They typically cost between $50 and $200 or more on a daily basis, which,
in turn, saves your pockets from spending on additional necessities.

The concrete cutting process starts with following the safety precautions, like taking into consideration warning
signs and safety barriers. Then, proceed with the process by marking the accurate measurements that need to be cut later
and using layout tools like straight edges, laser levels, and chalk lines. Now, use diamond cutting blades to
essentially cut the concrete correctly. At the same time, implement dust control measures to reduce debris dust and
airborne particles generated during the cutting. After cutting, complete edge finishing, cleanup, inspection,
documentation, and post-cutting measures.

Standardised Industry Prices For Concrete Cutting

On average, it takes $20 per metre to cut through a thickness of 50 mm wall, and labour cost alone takes around $90 per
hour. If you see the cost of concrete cutting based on linear footing units, then it would range from $6 and end at
$10, with square foot unit costs ranging between $2 and $6. The concrete cutting cost also depends upon the project
in the following manner:

• Concrete Slab Removal Cost: From $600 to $1,000 based on cutting size


• Concrete Piano Removal Cost: From $1,000 to $2,000


• Driveway Removal Cost: From $540 to $1,510.


• Sidewalk Removal Cost: From $540 to $1,510.


• Concrete Stairs Removal Cost: Around $300.

So, keep these cost values in mind when you are planning for professional concrete cutting for your property, and
choose wisely. In some cases, the removal cost mentioned may vary depending on the project type and other complex
factors. In terms of cubic yard units, concrete cutting takes between $120 and $150 for one cubic yard, and the cost
ranges between $240 to $300 for 2 cubic yards. If you want to opt for cost-cutting based on the depth of cut, then
you will be charged as follows:

• 100 mm Depth- About $20


• 300 mm Depth- Between $30 and $50.

Professional And The Best Practices For Concrete Cutting

It is safe to count on professional concrete cutting practices if your requirement is concrete cutting of
different structures, like water, land, and more. We made a list of concrete-cutting practices that professionals usually adopt to complete their jobs successfully. The list is just as follows:

• Flat, wire, chain, ring, wall, core, and hand sawing


• Diamond chainsaw Cutting


• Controlled demolition


• Slab lifting and removal


• Scanning and imaging


• Hydraulic splitting


• Decorative or patterned cutting


• Core drilling

Dive into the world of outdoor installations by comparing the
costs of a
Metal Pergola and Concrete Cutting for your home.

Various Types Of Concrete Cutting Services With Their Average Costs

Concrete cutting services in Australia include a range of methods suited to certain requirements, each with an average price. Various concrete cutting types and their approximate costs are mentioned below:

• Core drilling: It is a technique used to precisely drill holes in concrete for HVAC, plumbing, or electrical systems. Based on the depth and diameter, the price for each hole varies from $80 to $120.


• Slab sawing: Cutting horizontal surfaces like floors, bridge decks, and sidewalks is best done using a slab saw. Depending upon the thickness and complexity, the typical cost per square meter ranges from $50 to $75.


• Hand sawing: It is good for locations with limited access or smaller projects. Based on the intricacy and depth of the cuts, the hourly rate varies between $100 and $150.


• Concrete grinding: It is used to eliminate flaws and smooth uneven surfaces. Price varies greatly but typically cost between $60 and $80 per square meter.


• Wall sawing: Cutting holes in vertical concrete structures, such as walls, is done with a wall saw. Costs are greater and may range from $100 to $200 each hour for every cut due to the equipment and level of precision required.


• Wire sawing: It is a technique used in demolition that is frequently used to cut big portions of substantially reinforced concrete. Costs might increase dramatically from $100 per meter to multiples of that amount, depending on intricacy.


• Concrete scanning: Before cutting, this ensures safety and accuracy by detecting utilities, rebar, and post-tension wires inside the concrete. Hourly rates vary from $100 to $200.

Conclusion

Concrete cutting costs vary depending on the size, depth, and complexity of the project, with prices ranging from $1 to $10 per linear foot. Factors such as location, equipment, and labour also impact the total expense. Additionally, concrete slab removal costs typically range from $600 to $1,000, depending on the cutting size. It's essential to get quotes from concreting professionals for an accurate estimate.