5 Common Stove Top Problems And How To Fix Them

Do you want to have a clear idea on what are the 5 common stove top problems and how to fix them? We provide the right information. Ranging from problems like burners, not heating and the burner won't turn on to burner coil warping and indicator lights not working, there are many problems. However, we mentioned the most common 5 stove problems that can be easily fixed by putting slight effort into it. So, if you want to be an individual who resolves stove connections by simply courting on our DIYs, then implement our ways of fixing stove problems.

Stove 5 Top Problems And Solutions To Fix Them

Uneven Heating

The possible and most common causes for uneven heating are blockages in the burner, damages in the burner and incorrect placements. So, take a look at fixing this problem and eliminating all these causes.

• First, turn off the stove and allow it to cool before you start the cleaning work.


• Remove burners carefully to clear away the visible debris using a soft bristle brush and a clean cloth.


• Inspect your burners for signs of discolouration, damage and warping and test it using a brush.


• Then, align the burners properly into their respective sockets, placing them in their designated positions.


• If you still find problems with heating, then order burners to install them in the sockets.

Gas Burner Clicking Continuously

Two reasons that cause your gas burner to continuously click are the accumulation of moisture in the burner and the residues of food particles around the igniter. Do you want to know how to fix this problem? Here you go.

• Before you attempt to fix the gas burner to eliminate continuous clicking noises, you must turn off the gas for safety issues.


• If the reason for continuous clicking is moisture in the burner, then allow the burner to dry naturally. However, if this is not the case proceed further.


• Lift and remove the grates covering stove burners and get access to the components of the burner.


• Now clean the burner thoroughly using a clean cloth or a soft brush to remove any visible residues of dust then proceed with cleaning the igniter in the same way.


• If you are unable to remove the dirt using a brush or clean cloth, then you can use an alternative option of blowing compressed air on burners.


• Turn on the gas to ignite and confirm no continuous clicking noises are heard when the gas burner is used.

Burner Won't Light

Did you keep trying to light up your gas burner but it wouldn't turn on? Then, it might be because of possible causes such as clogs in burner holes and issues with gas supply. Now, see how you can fix the issue if your stove's burner won't light.

• As a safety measure, first, turn off the gas supply valve that is located beneath or behind your stove.


• Now gain access to burner components by removing the coverings of burners known as grates.


• Conductor infection for burner holes of the stove for visible blockage signs such as grease and food residues.


• Use a needle or sharp pin to clean burner holes as this can dislodge all kinds of dust particles and debris present in them.


• Then, check the gas supply valve and ensure that it is fully opened then inspect the gas line to remove blockages over there.


• Turn on the gas to test the ignition and make sure it is lit properly.

Burner Too Hot

Certain causes can lead to your stove burner becoming excessively hot, such as faults in the control switch and heating elements. Promptly addressing and fixing these issues is essential to prevent permanent damage to your burner.

• Immediately after turning off the gas supply valve to gain access to coil-type burners and smooth-top burners.


• Test these two types of burners using a multimeter to check the continuity of gas. Check the below scenarios to confirm faulty burners.




• No-Fault In Burners: Continuity across the terminals.


• Faulty Burners: No continuity across the terminals or issues in continuity.




• Upon finding a fault in the control switch, order a replacement model of your stove and replace it according to the manufacturer's instructions.


• Now, use a multimeter to check the heating elements' continuity across the terminals and then test the temperature of burners to find your stove burners are no longer hot.

Gas Smell When Stove Is Off

If you detect the smell of Liquefied Petroleum Gas (LPG) from your stove even when it's turned off, it indicates a gas leak. This poses a serious safety concern that requires immediate attention and swift resolution.

• Once you address gas leaks, you need to take immediate action to fix this problem by turning off the stove and gas supply.


• Now, increase the ventilation where your stove is located by opening all the access to air like doors and windows. Note- Do not ignite matches when you smell gas as this can threaten your safety.


• After leaving the room for ventilation, evacuate the area while ensuring there are no electrical devices on the premises of the stove.


• Contact the Australian emergency number to report a gas leak at your property and let them handle it from there on until the gas leak area is declared as "safe to use."

Conclusion

Improper stove connection leads to gas leaks, fire hazards, uneven heating, appliance damage, gas ignition issues and many more. So, you need to be aware of all such common stove top problems and fix them for safe use of your stove. When you find the right solutions to fix stove top problems, you are free from all the problems caused by stove connections. If stove top problems are fixed as soon as you notice them, you can use your stove efficiently to save your pockets from higher utility bills. A better option instead of DIY fixing stove top problems, you book professionals who are well-trained and well-versed.