Find Local Floor Coating Near You

Types of Floor Coatings: Choose For Your Floor

Several floor coating choices are available. Check and decide the best one for your floor.

Timber Floor Coatings

• Solvent-Borne Polyurethane: Solvent-borne polyurethane provides a good level of wear and scratch resistance. But it appears somewhat artificial and quickly turns yellow.


• Oil-Modified Urethane: Oil-modified urethane uses tung oils and is mineral-based for a very nice appearance. These types of coatings do not wear as effectively as other coatings and require more frequent refinishing. It is often necessary to recoat the floor every 3-5 years.


• Water-Borne Polyurethane: The most widely used floor coating is water-borne polyurethane. It does not yellow, is non-toxic, very hard-wearing and cures faster than any other coatings.

Epoxy Floor Coatings

• Chemical Composition: Epoxy floor coverings use chemical agents that solidify to a plastic-like surface when combined. They are versatile and can be used on all sorts of floors and stick to the surface directly. This covers floors, walls, benchtops, timber, asbestos and gypsum.


• Customization: Epoxy coatings also come in different colors which will enable you to determine the appearance of your floor. The new epoxy coatings are very strong and do not require frequent maintenance and are also eco-friendly. Some of them comprise a Base coat, Multi Colored chips, and a top coat that provides a bonded and flexible layer. They do not fade over time, can be washed several times and stay looking good for many years.

Precautions for Floor Coating

• Preparation: It’s also important to note that floor coatings should not be applied until all carpentry, electrical, plastering, plumbing, and glazing are finished. Paint all the walls and the ceiling but not the skirting board area. Do not let any silicone-based product come in contact with the sanded floor because the coating will repel.


• Sealing and Protection: Cover the fireplace, vents, and windows with masking tape and paper to avoid accumulation of dust. If, however, you cannot move it, then cover up light fittings and furniture that are immovable.


• Drying and Hardening: Floor coating can take up to 24 hours to dry while it can take up to 10 to 14 days to fully cure. It advises against the use of shoes in the first 7 days of baptism. Move furniture within the first two weeks using protective felt pads and should not drag furniture. Be careful with the large furniture as they can be cumbersome and cause an accident when moved around. Avoid laying rugs for at least 2 weeks.

Why Trust ServiceTasker for Hiring a Floor Coating Expert?

• Experienced Professionals: With ServiceTasker you will only get to work with some of the best floor coating professionals who have years of experience.


• Verified and Certified: All the professionals are checked and are ABN registered, so you are hiring reputable skilled workers.


• Customer Reviews: it is always advisable to read what other previous clients are saying about the service before you decide to hire it.


• Competitive Quotes: To make your choice, it is recommended to search for multiple offers and compare prices with each other, thus choosing the most suitable offer for you.

So you can rely on us to facilitate you with hiring the best and most professional floor coating service.

How Much Does Floor Coating Cost?

Several factors that influence the choice of flooring include the condition of the subfloor, the appearance and texture preferred, and the size of the area to be covered. Floor coating averages $30-$35 per m2 for two coats applied over the concrete substrate. If you choose the diamond grinding and decorative floor finish, costs may go up to $80-$100 per square metre.

Solvent-based coatings cost between $12-$37 per litre, while water-based coatings cost between $15-$20 per litre. Colour tints are about $75 per litre. The rest of the prices are quoted per square metre. Flake flooring costs $40-$60 per square metre, metallic flake is $60-$120 per square metre and acrylic flake is $60 to $90 per square metre.

The majority of specialists estimate the price of applying epoxy depending on the area of the room. However, if the preparation takes many hours, then the prices will be higher. That is why larger surfaces are often given better rates based on the time spent on setup and preparation. Garage floors cost around $80 per square metre for a single-car garage and $50 per square metre for a double-car garage. To get a better estimate of your floor coating costs, try using a flooring cost calculator.

How ServcieTasker Work for Hiring Floor Coating Expert?

• Post Your Task: To start with, upload your floor coating project on our site. Give details on the work to be done such as the size of the area to be done, the preferred finish and any other specifications.


• Get Quotes: While checking each quote, be sure to look at factors such as price, experience, and previous client reviews.


• Compare and Hire: After getting the quotes, you should check them against each other to choose the right deal for you. Find the best floor coating expert who can provide the best services at reasonable prices, and then you should contact them for your project without unnecessary trouble.