Electrical Safety Checklist

Basic checklist for electrical safety

• It is recommended that anyone exposed to floodwater wear appropriate personal protective equipment (PPE).


• Make sure that tools get insulated and are in the correct condition.


• Look for burnt wires or misaligned plugs that have suffered from heat stress before operating an electrical appliance.


• It says to avoid electrical hazards by ensuring that work areas do not get in touch with water.


• Electricity should be used where it can be adequately grounded with ground fault circuit interrupters (GFCIs) especially where things get wet.


• Do not connect many apparatus to one circuit: this is because many apparatus draw many currents.


• Ensure free and direct visibility to electrical panels and operations switches.


• For safety avoid power on check always off.


• The presence of overhead power lines is a common feature while working in elevated areas.


• Its circuit and breaker must be labelled accordingly simply because it will make identification easy.


• Extension cords should be of the correct rating for the load to be dealt with.


• Do not bring any combustible products near the electrical apparatus.


• Check electrical equipment for signs of corrosion after a certain period.


• Always use surge protectors to protect delicate appliances.


• It is also important to provide the best grounding for all electrical equipment and assets.


• Act cautiously regarding static electricity and avoid possible consequences.


• Maintenance of electrical tools requires that they be stored appropriately to avoid harm or damage.

Checklist for electrical preparation work

• Examine all the principles of electrical safety regulation and standards.


• Tools and equipment to be used should also be checked for their insulation as well as their capability to work.


• All the workers must be informed of the electrical safety guidelines.


• Distinguish electrical risks in the environment.


• Establish a fact check on whether all the circuits have been safely laid and whether they are labelled or not.


• The following measures are taken Ensure availability of personal protective equipment (PPE) for all workers.


• Develop protocols for removing power/s for disconnecting circuits.


• At the same time, AMS providers need to ensure that first aid kits and emergency contacts are available.


• Pre-job safety meetings should be carried out so that every delegate could be informed of the perceived danger.


• Ensure that GFCIs are in operation within wet areas or areas surrounded by outdoors.


• Make guarantees all the extension cords are of the appropriate current carrying capacity for the circuit.

Steps for Electrical Fire Safety

• Make sure that there are smoke detectors and that the ones that are there are in working order.


• Ensure that fire extinguishers to be used on electrical fires have an electrical rating and are well placed.


• Engrave to all workers how to use fire extinguishers in case of an emergency.


• Do not store any volatile products or products causing sparks near electrical appliances.


• Sticker all the electrical panels and the switches of the emergency power-offs.


• There should be occasions when everyone practices what should be done in case of a fire.


• Ensure free and unobstructed access to fire exits and fire fighting appliances.


• Much care should be taken on the kind of grounding methods adopted for electrical connections to reduce the chances of producing sparks.


• You should also establish surveillance for the overheating of electrical devices and the outlets they are connected to.


• For protection against electrical surges, ensure you find good surge protectors to use.


• It is important to update your list of emergency contacts and make sure they’re easily accessible.


• Conduct periodic check-ups of the fire fighting measures and the manuals in use periodically

How to keep the electrical equipment safe?

• Sanitize all the equipment you use with acid or alcohol solution before and after their use respectively.


• Check all cords all have no damage and are not frayed.


• Make sure the cord seal to the plug isn’t exposed.


• Be certain that no equipment, cords, or plugs get too hot when in use.


• Check to ensure that wires in plugs are plugged correctly and correctly connected.


• Check and make sure casings, particularly those for protective guards are not in good shape.


• Make sure that the blades and the processes by which they are cut are sharp and safe.


• Identify all of the active controls and emergency stop mechanisms on each one of the instruments.


• Make sure users are made to understand how to use the tool safely.


• Maintenance schedules for all equipment are to be kept in chronological log for inspections.

External electrical safety tips

• Make a site survey to determine existing risks.


• Provide barriers to restrict the admission of people to risky sections.


• Ensure all the equipment is outdoor compliant, all equipment used must be rated for outdoor use.


• Make certain that tools have a good ground and that electrical articles are grounded.


• Do not bring in or allow flammable materials to get close to any work sites.


• Its fire risk rises in contact with water sources or in wet climates, be careful when operating in such conditions.


• To avoid the creation of misunderstandings ensure that you continually communicate with the team during the completion of your tasks.


• Daily check if tools and equipment are properly functioning.


• Lockout procedures should be followed according to or when performing mechanical maintenance on equipment.


• Report every accident or close call so that the incident can be used to develop better practices or systems.

Ensure your electrical systems are safe and up to code with our Electrical Safety Checklist. For professional inspections and repairs, trust local electricians to provide expert service and peace of mind for your home or business.